❤️❤️ Australia wide shipping only $12.95 ❤️❤️

After Midnight
After Midnight
After Midnight
After Midnight
  • Load image into Gallery viewer, After Midnight
  • Load image into Gallery viewer, After Midnight
  • Load image into Gallery viewer, After Midnight
  • Load image into Gallery viewer, After Midnight

After Midnight

Regular price
$49.00
Sale price
$49.00
Regular price
Sold out
Unit price
per 

Think shadowy depths of an island lagoon late at night to conjure up this deep and velvety dark blue with distinctive teal tones. Completely adaptable, strong and dramatic in any setting and a perfect backdrop for neutrals or jewel tones. Fabulous teamed with your Mid-century teak or cool Scandi vibes if they are your thing.

As with our indoor paint, the Al Fresco Collection is EN:71-3 certified meaning safe to paint children’s toys, it has little to no odour with very low VOC content. It is hard wearing, weatherproof with a robust and chalk finish and of course, it paints like a dream!



 

General

  • Water based
  • Suitable for interior and exterior use
  • Chalk and mineral paint formulated for wooden furniture. Also suitable for laminate, powder coated radiators, UPVC, ceramic wall tiles (we recommend avoiding very wet areas like shower/bath surrounds). Can be used for internal walls – in this case, thinning with up to 10% tap water is advised to ease application.
  • Also suitable for interior wood, concrete and most laminate floors with correct application – please note that maintenance may be required in these situations. 
  • Minimal VOC content with virtually no odour
  • UKCA and EN71-3 certified (safe for use on children’s toys) EN71-3:2013+A3:2019
  • Self-priming – no primer or undercoat required
  • Finish – flat, almost no sheen
  • Self-sealing - does not require a top coat for durability
  • Self-levelling - meaning little to no brush marks is achievable

Coverage

  • A 750ml tin will provide a single coat of up to 12.5m2. For a durable finish, a minimum of 2 coats is required, so your 750ml tin should provide full coverage for just over 6m2on non-porous surfaces like laminate or metal.
  • Porous, or ‘thirsty’ surfaces like bare wood or MDF, tend to absorb paint meaning additional coats are likely to be required to achieve a durable finish. In this case, your 750ml tin will provide less than 6m2of full coverage. If you apply the paint too thinly, durability may be affected.

Preparation

  • Ensure surfaces are in suitable condition for painting - clean, dry, free from wax, grease of penetrating substances and in sound condition. If previously painted, remove loose or flaking paint.
  • Surface preparation required in addition to the above – clean with Frenchic Sugar Soap, rinse and dry. Hand-sand sufficiently to abrade the surface. Wipe off any dust, paint away! For a great demonstration, see our video from Frenchic TV.
  • Take care on opening the tin lid – a Frenchic tin opener is recommended.
  • Stir thoroughly with a wide implement prior to each use.

Application, drying and sealing

Clean up and storage

  • Reseal tin after use. Clean up any spills immediately with water. Wash brushes in warm, soapy water.
  • Do not store where the tin could be subjected to damp, frost, freezing or high temperatures.